Pressure regulator – is one of the necessary air source processing components in industrial automation production. It is the regulating part of the pneumatic actuator, which can regulate the pressure of the air source, so that the air source is in a constant state, and the damage to the valve or the actuator and other hardware can be reduced when the air pressure of the air source changes.
R-07 pressure regulator is SNS Pneumatic on the basis of the original technology, improved, upgraded.After the upgrade, its performance is better, the appearance is small and exquisite, and the pressure adjustment is more stable.
After the R-07 pressure regulator has been improved, its flow rate has significantly doubled compared to before the rectification. After the flow rate is increased, on the one hand, it can meet the greater demand for gas, on the other hand, under the same gas consumption, the output pressure can be more stable than the original.
Because the R-07 pressure regulator itself is small, the price is affordable. It is used as a safety valve in many environments. When the ordinary safety valve is closed, the pressure is generally about 0.1MPa lower than the opening pressure, and there will be some pressure loss in actual use. Although the R-07 pressure regulator has a low overflow flow rate, the improved pressure control is more accurate and the pressure loss is small, and it can be used as a safety valve if conditions permit.
Product Advantages
1, fine workmanship structure light and compact, easy to install and use.
2, high-quality selection of precision mold, flame retardant shell, durable and strong.
3, accurate pressure regulation accurate pressure regulation error free, safe and reliable, suitable for a variety of environments, to meet the needs of different working conditions.
4, exquisite design of press-in self-locking mechanism, can prevent the setting pressure caused by external interference. Strong connection, no air leakage.
Precautions for operation
When operating the pressure regulator, slowly turn it up or down, and do not violently twist it. When purging pipes, do not turn the pressure regulator to the maximum when it is increased; otherwise, the pressure regulator will be locked and the secondary pipe of the pressure regulator cannot be vacuumed. At the same time, if the pressure regulator is adjusted during purging, it should be adjusted back to the original position in time.