With the rapid development of petroleum, chemical, natural gas, refining and other industries, product quality requirements are becoming increasingly strict. Today, control facilities play a vital role in the quality of these liquid and gaseous products. Due to the emergence of ferrule joints, The sealing performance of the product is greatly improved.
As an advanced pipeline connection component, the ferrule joint has brought a lot of convenience to our lives. Its excellent performance comes from the combination of various design features, and it is a well-known tool accessory.
Shenchi uses copper material, combined with advanced High-precision machining technology. After multiple processes and strict quality control, Made of KT series ferrule joints. Suitable for applications that require reliable sealing and use metal pipes. Working conditions that do not require disassembly and assembly.
product structure
It consists of three parts: the joint body, the ferrule with a sharp inner blade, and the nut that acts as a compression force.
working principle
KT series ferrule joints have advanced shape design features. When the ferrule and nut are inserted into the joint body on the steel pipe and the nut is tightened, the outside of the front end of the ferrule fits the conical surface of the joint body, and the inner blade evenly bites into the metal. tube, forming an effective seal.
Features
KT series ferrule joints are widely used in scientific research laboratories, petrochemicals, new energy, ships a0nd other fields due to their safety and reliability, good sealing performance, strong pressure resistance, and reliable ferrule connection.
Assembly instructions
In addition to the material, manufacturing accuracy, heat treatment, etc. of the parts, the performance of the ferrule type pipe joint is also closely related to the assembly quality. Therefore, it is recommended to assemble according to the following methods:
Cut the pipe to the required length on a special machine tool, or you can cut it by hand. The perpendicularity between the cut surface and the center line of the pipe shall not be greater than half of the pipe’s exterior tolerance.
Remove inner and outer burrs, metal shavings and dirt from the pipe end.
Remove anti-rust oil and dirt from all parts of pipe joints.
Place the ends and ferrules on the pipe in sequence, then insert the pipe into the bottom of the tapered hole in the joint body and align the ferrule. While tightening the nut, turn the pipe until it stops, then tighten the nut 1 to 1/3 turns.
Mechanical preloading can also be used during assembly, and the ammunition meets the above requirements.
Shenchi Pneumatic KT series ferrule joints. Because of its own advantages.
Efficient and sealed features. An excellent choice for pipe connections.