What is an air source processor?

The air source processor is a mechanism that works through the force generated by gas pressure or expansion, and converts the elastic energy of the compressed air into a kinetic energy mechanism. Including air filter, pressure reducing valve, lubricator, etc. Startup products are widely used in automated production in metallurgical electromechanical, construction, transportation equipment, household appliances, light industry, machine tools, diagnosis and treatment, packaging and other industries. However, since the compressed air cannot be directly removed by the air compressor, the compressed air contains a certain amount of water, oil and dust, and the temperature of the compressed air reaches 140-170°C. Some of the water and oil have turned into gas. Therefore, it must be purified. Compressed air for industrial equipment. The composition of the air source processor includes an air filter, a pressure reducing valve and a lubricator. Some brands of solenoid valves and cylinders can be lubricated without oil (grease), thus eliminating the need for a lubricator. The filtration is generally 50-75μm, the pressure regulation range is 0.5-10Mpa, the filtration precision is 5-10μm, 10-20μm, 25-40μm, and the pressure regulation is 0.05-0.3Mpa, 0.05-1Mpa. For the triplets. The three major pieces are indispensable air source equipment in most pneumatic systems. They are installed near the gas equipment and are the ultimate guarantee of compressed air quality. The air filter, pressure reducing valve and lubricator are respectively installed with three parts according to the air intake direction. The combination of an air filter and a pressure reducing valve can be called a pneumatic two-piece. The air filter and pressure reducing valve can also be assembled together to become a filter pressure reducing valve (same as the air filter and pressure reducing valve). If oil mist is not allowed in the compressed air, an oil mist separator is required to filter the oil mist in the compressed air. In short, these elements can be selected according to necessity, and can be used in combination. The air filter is used to clean the air source, filter the water in the compressed air, and prevent the water from entering the equipment with the gas. The pressure reducing valve can stabilize the gas source, stabilize the gas source, and reduce the damage to the gate valve or actuator and other hardware caused by the sudden change of the gas source pressure. The filter is used to clean the air source, which can filter the water in the compressed air and prevent the water from entering the equipment with the gas. The lubricator can lubricate the moving parts of the human body, and lubricate the parts that are inconvenient to add lubricating oil, which greatly improves the service life of the human body.